NAT32 Winsock Mode

[Index] [NDIS3PKT] [Web Features] [Audio Features] [How-To Pages] [Help] [Web]

NAT32 runs in Winsock Mode whenever the NDIS3PKT Device Driver is not running on your system, or if you started NAT32 as: nat32.exe 0

In this mode, NAT32 has no direct access to Network Adapters and so no Routing, Address Mapping or Port Mapping can be done, but many other useful Web features and Audio features are still available. No registration is required in this mode.

Click the icon for details on how to install NDIS3PKT.

Two distinct user interface modes are available: Web Mode (this mode) and Console Mode (a powerful command-driven mode).

To switch modes, click the Switch icon or press F2.

To set the default mode, edit the startup file as explained in the configuration notes.

[Edit] [Back]